|
Cats Universal Faceplate Protective Sheet
Description: Universal faceplate protective sheet. Be creative and decorate your own cellphone, iPOD, PDA and etc. Can be attached to any clean and dry surface. Easy to apply :- Cut to fit your phone, peel off the back, lay down smoothly and apply pressure.(Instructions also come in the package) Prevents scratches. Non-adhesive and removable. Measures : 90 mm x 157 mm
|
|
Cell Phone Car Mount Passive Repeater Antenna
Description: Improves reception and call quality while using your cellular phone inside the vehicle. Perfect for strengthening your signals in low signal areas. Passive-repeater circuit board reduces signal loss, cutoff and fade call quality when you make or receive calls. Easy stick-on installation, no drilling required. Select a mounting location at the top of the rear window. Clean the interior and exterior of the glass where the antenna and sensor box will be located. Peel off sticker paper from the back of the antenna base, place the antenna on the exterior glass and press firmly. Using the antenna as a target, place the sensor box on the interior glass and press base firmly. No power or wires necessary.
|
|
Cell Phone Volume Control Car Kit With Holder
Description: This handsfree unit allows for hands-free operation of your cellular phone by broadcasting over a speaker that plugs into your car's vehicle cigarette lighter outlet and clips the other end over the phone's receiving end. A cell phone holder, an earpiece and a cigarette lighter socket with speaker unit (comes with volume control) are included. For better result, cell phone should be placed in front of the user within 2-3 feet. It is compatible with all Audiovox, Ericsson, Kyocera, LG, Mitsubishi, Motorola, Nextel, Nokia, Panasonic, Qualcomm, Samsung, Sanyo, Siemens, Sony, Toucpoint and other cell phones.
|
|
Cellular Phone Holder - Bar Style
Description: This holder lets you put your phone exactly where you want it. Attach it to any car dashboard with included double-sided adhesive sticker ( peel off sticker paper from the back of the holder). It has an adjustable arm to fit any cellular phone, so there's no fumbling while you drive. Compatibility: All Nokia, Kyocera, Motorola, Nextel, Ericsson, Samsung models and any other cell phones.
|
|
Cellular Phone Holder - Light Poplar Bar Style
Description: This holder lets you put your phone exactly where you want it. Attach it to any car dashboard with included double-sided adhesive sticker ( peel off sticker paper from the back of the holder). It has an adjustable arm to fit any cellular phone, so there's no fumbling while you drive. Compatibility: All Nokia, Kyocera, Motorola, Nextel, Ericsson, Samsung models and any other cell phones.
|
|
Cellular Phone Holder - Silver Bar Style
Description: This holder lets you put your phone or iPod exactly where you want it. Attach it to any car dashboard with included double-sided adhesive sticker ( peel off sticker paper from the back of the holder). It has an adjustable arm to fit any cellular phone and Apple iPod, so there's no fumbling while you drive.
|
|
Champagne (I) Faceplate For LG VX6000
Description: This faceplate is compatible with LG VX 6000. LCD screen is included. Need a Philips Head Screwdriver to complete the installation.
|
|
Champagne (I) Faceplate For Motorola v220
Description: This faceplate is compatible with Motorola v220. Battery cover is included. Need a Faceplate Removal Tool to remove original faceplate.
|
|
Champagne (I) Faceplate For Nokia 3100, 3120
Description: This faceplate is compatible with Nokia 3100 and 3120 cell phones. Keypad, battery cover and lens are included.
|
|
Champagne (I) Faceplate For Nokia 3586/i, 3589/i
Description: This faceplate is compatible with Nokia 3586, 3586i, 3589 and 3589i cell phones. Keypad, battery cover and Lens are included. Easy installation. No tools are needed.
|
|
Champagne (I) Faceplate For Nokia 8310, 8390, 6510, 6590
Description: This faceplate is compatible with Nokia 8310, 8390, 6510 and 6590 cell phones. Keypad, battery cover and Lens are included.
|
|
Champagne (I) Faceplate For Siemens c56
Description: This faceplate is compatible with Siemens c56. Keypad, lens and battery cover are included.
|
|
Champagne (II) Faceplate For Nokia 3360
Description: This faceplate is suitable for Nokia 3360 cell phones only.
|
|
Champagne (II) Faceplate For Nokia 3395, 3390, 3310
Description: This faceplate is compatible with Nokia 3395, 3390 and 3310 cell phones.
|
|
Champagne 7210 Look Faceplate For Nokia 8290, 8210
Description: This faceplate is compatible with Nokia 8210 and 8290. It makes your cell phone look like Nokia 7210 model. Lens, battery cover and key pad are included.
|
|
Champagne Auto Sliding Cover Faceplate For Nokia 3360
Description: This faceplate is compatible with Nokia 3360 cell phones only. There is an auto sliding cover to prevent the keys from being accidentally pressed. Keypad and lens are included.
|
|
Champagne Auto Sliding With Battery Cover Faceplate For Nokia 8260
Description: This faceplate is compatible with Nokia 8260 cell phones. There is an auto sliding cover to prevent the keys from being accidentally pressed. Keypad, lens and battery cover are included. It requires a Torx #6 screw driver for installation.
|
|
Champagne C330 Faceplate For Motorola C330, C332
Description: This faceplate is compatible with Motorola C330 and C332 cell phones. Keypad, battery cover and Lens are included.
|
|
Champagne C332 Faceplate For Motorola C332, C331g, C330
Description: This faceplate is compatible with Motorola C332, C331g and C330 cell phones. Keypad, battery cover and Lens are included.
|
|
Champagne Clip-On Cover For Motorola SLVR L7
Description: This hard protector cover is designed for Motorola SLVR l7 cellular Phone. Comes with 2 pieces of hard plastic protective plates. Protect your phone against scratches. Keep your phone body in good shape and looking new. Easy installation, no disassembly is needed. Protector plate has openings for volume / side buttons, keypad buttons, camera lens and charger jack which allows access to all phone functions. Phone can be used while inside the cover. Made of hard plastic.
|
|
Champagne Faceplate For Audiovox 4000, 4500
Description: This faceplate is compatible with CDM-4000, CDM-4000AT, CDM-4000BA,CDM-4000XL, CTX-4000, CDM-4500 and CTX-4500 cell phones. Keypad and lens are included. Need Philips Head screwdriver to complete the installation.
|
|
Champagne Faceplate For Audiovox CDM 100
Description: This faceplate is compatible with Audiovox CDM 100 cell phones. Keypad and lens are included.
|
|
Champagne Faceplate For Audiovox CDM 8910
Description: This faceplate is compatible with Audiovox CDM 8910. LCD screen is included. Need a Philips Head Screwdriver to complete the installation.
|
|
Champagne Faceplate For Audiovox CDM 9000
Description: This faceplate is compatible with Audiovox CDM 9000 cell phones. Keypad and lens are included. Need Philips Head screwdriver to complete the installation.
|
|
Champagne Faceplate For Audiovox PCX 1100xl
Description: This faceplate is compatible with Audiovox PCX 1100xl cell phones. Keypad and lens are included. Need Philips Head screwdriver to complete the installation.
|
|
Champagne Faceplate For Audiovox PCX 1110xl
Description: This faceplate is compatible with Audiovox PCX 1110xl cell phones. Keypad and lens are included.
|
|
Champagne Faceplate For Ericsson T200
Description: This faceplate is compatible with Ericsson T200 cell phones. Keypad, battery cover and Lens are included.
|
|
Champagne Faceplate For Ericsson T310, T316
Description: This faceplate is compatible with Ericsson T310 and T316 cell phones. Keypad, battery cover and Lens are included.
|
|
Champagne Faceplate For Ericsson T60, T61 Series
Description: This faceplate is compatible with Ericsson T60, T60d, T60lx, T61d, T61lx and T61z cell phones.
|
|
Champagne Faceplate For Ericsson T616, T610
Description: This faceplate is compatible with Sony Ericsson T616 and T610 cell phones. Keypad, antenna cover, battery cover and Lens are included. It requires a Torx #6 screw driver for installation.
|
